Suburban SW6DERA 20.3 Litre Hot Water System - Gas / 240V
Important! If shopping around ensure that the Suburban SW6DERA unit you purchase includes the Suburban System Switch plate - Without this switch plate you wont be able to operate your unit! CaravanMods include the switch plate when purchasing a SW6DERA Heater along with White or a Black Door combo.
If replacing an SW6DEA unit then this switch plate isn't required as the switch plate used on the SW6DEA is the same as on the new SW6DERA.
The SW6DERA must not be used with the old style SW6DEA door or any other HWS door. Only purchase the 'no door' option if you have an existing SW6DERA door on hand already.
The Suburban SW6DERA is the latest release from Suburban replacing the SW6DEA model, The new SW6DERA has been WaterMark Certified for the Australian Market. The SW6DERA offers a 20.3L Hot water heater which can be run on either Gas or 240V as well as manual or automatic 12V ignition.
Manufactured in the USA the SW6DERA features a steel tank with porcelain lining for an extended life and copolymer insulation jacket for superior heat retention.
Most commonly installed under a seat or in the back of a cupboard accessible by the supplied access door from the outside of the Caravan, Camper trailer or Motorhome.
All Suburban RV Hot Water Systems have an anode rod which absorbs the corrosive action of hot water. In the SW6DERA this is easily accessed through the access door of the unit, simply unscrew the anode to drain the tank of water and periodically check the condition of the anode. Genuine Suburban Anode's can be purchased directly from CaravanMods
|
- 2 Year Warranty
- Spare Parts readily available if needed!
- Supplied with
|
|
- A direct replacement for the older SW6DEA Suburban Hot Water System Unit
- Recommended cut out is 325mm x 325mm
- The unit comes fitted with a 240V Mains Power Cord meaning it plugs directly into a standard 240V Australian Socket found in Caravan's (Can also be hardwired by an electrician if needed)
- Gas Inlet & 12V Ignition also standard
|
|
- Direct Spark ignition for gas and an electric element
- Easy Access, Foam tank insulation and high 40lt/hr recovery rate!
Technical Specifications
- Part Number: SW6DERA
- Replaces Suburban SW6DEA
- Capacity: 20.3 Litres
- Heating Source: Universal Gas or 240V (12V or Manual Ignition)
- Recovery: 40lt/hour, 45 degree Rise
- 240V - 50Hz AC, 1440 watts - 6amp
- Pressure Relief Valve: 700kpa
- WaterMark Certified
- Gas Inlet 3/8 SAE
- Gas Consumption: 8.7 mj/h
- Cold water inlet is 1/2 inch female BSP
- Hot water outlet is 1/2 inch female BSP
- Colour of Access Door: Available with Black or White
- Cut out dimensions are recommended to be 325mm x 325mm
Available Kits & What's included
SW6DERA - Black Door Combo
SW6DERA - White Door Combo
SW6DERA - No Door
- 1 x SW6DERA 20.3L Hot Water System
- 1 x Genuine Suburban Anode Rod
- This kit is suitable if replacing an existing SW6DERA, i.e. you have the door and switch plate already. Not sure? Call our friendly team today! (02) 9806 3055
|
|
|