H2Flow Surface Mount Battery Powered Water Gauge and Flow Sensor
Master your water usage with our H2Flow Surface Mount Battery Powered Water Gauge and Flow Sensor. The Water gauge comes with a flow sensor and a surface-mounted water gauge panel, capable of reading multiple water tanks of any size. The water gauge comes with a mounting carrier and adhesive to easily mount to the surface of your caravan. It's great as an alternative to a water tank dipper and what's more, you don't need to drill any holes in your water tank. An essential item when you have to conserve water for free camping.
|
|
Specifications
- Water Gauge.
- Flow Sensor with the thread specifications of 1/2in BSP Male.
- Battery Powered (2x AA Batteries Included).
- 3-Pin 1.4m lead for flow sensor connection.
- Customise it to either litre or gallon.
- One unit is capable of calculating the total volume of multiple tanks up to 99,999 litres.
- Real-time display of water usage, not just Full/half full/empty.
How to Install
- Cut a made-to-measure hole and push the gauge into place, be sure to secure the screws.
- Install the flow sensor 20cm after the water pump, and ensure it's fitted with the water flow in the direction of the arrow.
- Cut a section on your John guest water pipe and add John Guest fittings to each side. If you have a softer 12mm food-grade hose choose to add our brass fittings with pipe clamps. Use plumbing tape to avoid leaks.
- Screw in the flow sensor and attach the 12V 3-pin cord to the gauge outlet, to start getting readings.
Please Note: Do not cut the flow sensor leads this will void your warranty. Use 1.4m or 3m extension leads instead.
Documents
|
