iCheck TPMS Pro Series Quick Connect Automatic Tyre Deflators Kit

Inclusions

• 4x Quick Connect Tyre Deflators.
• 1x Digital Tyre Gauge.
• 4x Valve Cores.
• 4x Valve Caps.
• 1x Tyre Repair Kit.
• 1x Valve Removal Tool.

• Adjustable from 10-30 PSI.
• 6061-grade aluminium for Superior Durability.
• Stainless Steel Precision Spring for Unrivalled Accuracy.
• O-Ring Seal for Increased Accuracy.
• Comes Apart in Two Pieces for Easy Cleaning.
• Allows for fine-tuning at increments of 0.5psi.
• 2 Year Warranty.
• Protective Storage Tin.

Tyre Pressure Gauge Specifications & Features

• Measuring Range: Pressure: 7.5~99psi, 0.5~6.8bar, 50~680kPa, 0.5~6.8kg/cm2, Depth: 0~15mm, 0~19/32inch.
• Accuracy: ±(1%+1LSD).
• Resolution: Pressure: 0.5psi, 0.05bar, 5kPa, 0.05kg/cm2, Depth: 0.1mm, 1/32inch.
• Unit: Pressure: psi; bar; kPa; kg/cm2, Depth: mm; inch.
• Operation Temperature: -20~60℃.
• Storage Temperature: -20~60℃.
• Power Supply: 2 pcs 3 V CR2032 lithium battery (included with purchase).

Tyre Deflator Instructions

• Loosen the locking cap in an anti-clockwise direction.
• Select your desired PSI on the adjustment ring. 
• Turn the adjustment ring until the bottom edge aligns with the corresponding horizontal line on the main body. 
• Line up the vertical line on the main body and adjustment ring.
• Tighten the locking caps.
• Press the clip to open the chuck and push firmly onto tyre valve.
• To fine tune use the horizonal ruler that goes up and down in increments of 0.5. Eg, if you require a PSI of 18, align the adjustment ring to 20 PSI and twist adjustment dial to the right until 20 psi aligns with -2.

Tyre Repair Instructions

• Remove the foreign object. 
• Insert the rasp tool into the hole and push it in and out a few times to clean the repair area. 
• Thread the repairing cord into the insertion tool. Ensure equal parts of the cord are on either side of the needle. Push the insertion tool and cord into the repair area. A small amount of cord should remain exposed above the tyre surface. Now remove the insertion tool by slowly pulling up on the handle.  The cord should remain in the repair area.
• Trim any excess cord protruding from the tyre.
• Reinflate the tyre and check for any levels.