Promore Products Aluminium Caravan Pole Carrier - Lockable, 1.8m to 2.3m

Measure your anti flap kit assembled and check it is shorter than the inside length of the size you choose. The 2.3m (230cm inside) suits most short, medium or long kits assembled plus 3 roof rafters, and the 2.2m (220cm inside) suits most short and medium kits assembled plus 3 roof rafters. The 2m (200cm inside) takes a kit taken apart plus 2 roof rafters, and it is a snug fit, so if you carry extra poles choose the 2.2m or 2.3m. The 1.8m (180cm inside) suits poles or extra storage. We tested with our own Secura Bar kit and roof rafters, and other brands can differ slightly.

We use ours for an anti flap kit and rafters, or the bed fly poles on our wind up camper. It works for anything long and slim you need extra space for, like some fishing rods, telescopic Starlink poles, tent poles, shade or windbreak poles, a flag pole, some collapsible ladders, or a broom and squeegee for washing the van. Before you pack it, check the item fits through the 168mm x 100mm door opening and is shorter than the inside length of your size.

Load your anti flap kit pieces in loose rather than in their travel bag. That way you can place each piece carefully and make the most of the space inside.

The flat, rectangular body gives you more room inside for poles, rafters and an anti flap kit. The lock is built into the door at both ends, so there is no padlock or screw cap to deal with. With the mounting track hidden underneath, it also looks far neater on your van.

No. Mount it across the direction of travel only, for example across your drawbar or the top of your rear bar. It has not been crash tested mounted lengthways, so it is not made for a car roof rack.

We do not recommend it. The supplied hardware has not been tested in those positions, and hanging it underneath may change your departure angle. Mount it across the drawbar, across the top or back of the rear bar, or under the front lip of most Jayco Outback wind up campers.

It fits under the front lip of most Jayco Outback wind up campers, including the Jayco Swan Outback, Hawk Outback, Eagle Outback, Penguin Outback and Dove Outback. We recommend double checking before you order, as it may not fit every year model, and aftermarket accessories fitted to your drawbar can get in the way. Measure the space under your front lip and compare it with the width and height of the pole carrier. The T nuts slide the whole length of the mounting track, so you can position them to suit your camper.

Yes, if you need a shorter carrier for your van or camper. Remove the 6 screws in the door frame face, cut the body perfectly square, then partially remove the screw channel on the lock catch side so the cam still catches. Any issues caused by shortening are not covered by warranty, so measure carefully and choose the closest size first.

The integrated mounting track runs along the underside and the supplied M8 stainless steel T nuts slide the whole length of it. Position the T nuts to suit your drawbar, rear bar or camper, then fit the 250mm threaded rod, mounting plates and nylon lock nuts. The install guide (PDF) above covers the full steps.

The lock is built into the door at both ends, so there is no exposed padlock to cut off with bolt cutters.

Yes, it comes with a 1 year warranty. Issues caused by cutting the carrier shorter are not covered.