Bed Fly Conversion Kit - Option A (Hardware Included)

Download our Option A installation manual here: Option A Bed Fly Conversion Kit installation manual

It's important to read the below description as it works to explain what you need to have on hand before purchasing. 

General Summary - Bed Fly Conversion

The bed fly conversion gives you the ability to convert your existing bed fly to a free standing structure. There are a number of options available when considering the bed fly conversion kit from CaravanMods.com.au. This is a pole conversion kit and it does not include the bed fly pictured.

Within each of the below Options (A, B & C) there are also three mounting kit options which are identified by numbered kits (1, 2 & 3). To decide which mounting kit is best for your trailer, see section 2. Decide on your mounting option

You are currently viewing the listing for Option A, click on the Option titles below to navigate to their own detailed listing (they'll open in a new window)

Option A: Traditional Bed Fly Conversion Kit - requires cutting/removal of existing fittings and insertion and crimping of the supplied fittings. Check out Option A here

Option B: Hot Swappable Pole kit - No cutting required, offers the flexibility to swap back and forth between the traditional pegs and ropes set up and the converted free standing set up

Option C: Full pole kit - A full pole kit, which is best for those who are either missing poles or have non standard poles.

Completing this modification will reduce your set up time by nullifying the need to erect standard bed fly poles supported by guy ropes and pegs, it is however, not a license to travel without some form of tie down for the bed flies. We’ve found that in most conditions the set up is adequate as is, however, when strong winds are forecast we recommend adding something to ensure the bed flies don’t become dislodged from the poles. A compact alternative to pegs/ropes are Octopus straps (Occy straps) which can be hooked through the lower eyelets on the mesh and the looped around the bed support poles. This becomes a simple step in the process of preparing for adverse weather. A handful of cheap Occy straps from the hardware store will no doubt also come in handy in your travelling toolbox.

Detailed Summary - Option A (Traditional Bed Fly Conversion Kit)

1. Check your Existing Poles 

Option A (this listing) comes with the plastic fittings which will be secured into your existing poles to replace the current fittings. To confirm that our supplied fittings will work for you, you must check you have the correct existing poles available.

You will need 8 poles in total, 4 from each end. Below is a list of what you need from one end.

• 3 x Upright Poles (pole A)
• 1 x Roof Rafter Pole (pole B)
• 1 x Roof Rafter Bracket

Pole B can be purchased separately here: https://caravanmods.com.au/products/roof-rafter-pole-bow-end-to-bent-spigot

You must also check that the poles have the correct inside diameter to suit our supplied inserts. All poles used for this modification should measure ~23mm inner diameter at the thicker end, and ~19.8mm inside diameter at the smaller end.
Also check that the straight spigot is at the thinner end and that the ground foot is at the thicker end (as illustrated below). If you poles are reversed, please contact us and we can put together an affordable custom kit.

2. Decide on your mounting Option

The mounting refers to how and where you mount your angled upright poles back to the camper trailer. There are two mounting styles available - the two options are described below as Bolts Mounting and Bird Beak plates mounting.

Three kits have been combined to accommodate different configurations of the two options. By using our selection options at the time of purchase, you can choose to do one mounting option at the front and the other mounting option at the back or you can choose to do the same style at the front and the back. 

• Kit 1: Bolts at the front and back 
• Kit 2: Bird Beak Plates at the front and back
• Kit 3: Bolts at one end and Bird Beak plates at one end

Kit 1 is the most popular as it comes supplied with all the hardware required and it simply needs to be installed on the side of the trailer. Typically, the side rails underneath the body are the easiest position to secure the bolts hardware. In addition, Kit 1 will also result in all vertical uprights having identical fittings, meaning that there is no need to sort the front fly poles separate to the back fly poles when packing up.

Most 'Outback' / off road Models can also accommodate Kit 3 as they have a rectangular shaped rear bumper bar. Kit 3 comes with the bolts for the front, however it does not come supplied with the screws for the bird beak plates. 

Most 'Touring' or on road models can not typically accommodate Kit 2 or kit 3 due to the rear round 'bumper' bar, in this case Kit 1 is the best option.

Kit 2 is popular for those trying to take their own twist on the modification, or for those with an outback model which has both a rectangular profile rear bumper bar and a vertical front nose.

Mounting - Bolts Mounting:

The bolts mounting option requires the installation of mounting hardware to the side of the camper. When you purchase a bolts mounting kit we will supply the required hardware.

Below image: Bolts Hardware fitted with angled upright pole secured

Mounting - Bird Beak Plates Mounting

The bird beak mounting option requires two bird beak plates to be installed on a flat surface. The screws required to secure the bird beak plates are not supplied as they would vary depending on the surface you're mounting to.

3. What's included from us

Kit 1: Bolt Mounting @ Both Ends

• 8pcs x Bow End Inserts fits inside both 25.4mm & 22.2mm (SKU: 401)
• 2pc x C-Clip fits inside 22.2mm & 25.4mm Tube (SKU: 400)
• 2 x Hardware Kits for Bolts Mounting (one kit does one end) (SKU: BFCKHW02)

Kit 2: Bird Beak Plates @ Both Ends

• 4pcs x Bird Beak plates (SKU: 405)
• 4pcs x Bird Beak Pegs fits inside 25.4mm Tube (SKU: 406)
• 4pcs x Bow End Inserts fits inside both 25.4mm & 22.2mm
• 2pc x C-Clip fits inside 22.2mm & 25.4mm Tube (SKU: 400)
  

Note: Screws for bird beak plates are not included

Kit 3: Bolts Mounting @ one end & Bird Beak plate Mounting @ one end

• 2pcs x Bird Beak plates (SKU: 405)
• 2pcs x Bird Beak Pegs fits inside 25.4mm Tube (SKU: 406)
• 6pcs x Bow End Inserts fits inside both 25.4mm & 22.2mm
• 2pc x C-Clip fits inside 22.2mm & 25.4mm Tube (SKU: 400)
• 1 x Bolts Mounting Hardware Kits (one kit does one end) (SKU: BFCKHW02)

Note: Screws for bird beak plates are not included

FAQs

What does the Bed Fly Conversion Kit do?

A Jayco bed fly conversion kit allows you to extend the sleeping area of your caravan and protects your bed from harsh climatic conditions. Our complete pole kit provides the ability for your bed fly to become a freestanding structure in your caravan. A bed fly conversion kit will reduce your set-up time when you arrive at your destination by eliminating the need for bed fly poles, guy ropes and pegs while providing you with adequate coverage and reducing the amount of equipment you need to carry with you to set up your caravan.

How do you set up the Bed Fly Conversion Kit?

Every bed end fly conversion kit you purchase from CaravanMods comes with a simple set of instructions for set-up. To set it up, all you need to do is put your poles in place according to the instructions, and you’ll be ready for a good night’s sleep. If high winds are forecast in the area you are camping in, it is best to secure your bed end conversion kit with octopus (occy) straps to ensure that nothing comes loose no matter how windy it gets.

What are the different types of Bed Fly Conversion Kits available through CaravanMods?

With CaravanMods, you have 3 different options to choose from in our Jayco bed converter kit range. The first is the traditional bed fly converter kit for which you will need to remove the existing fittings on your caravan and replace them with the kit fittings. Option two is the swappable pole kit, which allows you to swap back and forth between your traditional fixtures and the kit fixtures. The third option is the complete pole kit which is one of our most popular caravan accessories.

What type of camper trailer or caravan is best suited to the Bed Fly Conversion Kit?

The Jayco bed converter kit is suitable for most wind up caravans. If you are unsure as to whether our conversion kits will fit your caravan, it is best to contact our expert team at CaravanMods to discuss the specifics of the kit to make sure it is right for your van. If you purchase a Jayco bed fly conversion kit that does not fit your van, our returns policy will allow you to exchange the item with minimal fuss.

What are the benefits of using the Bed Fly Conversion Kit?

The benefits of installing a bed end conversion kit are all in the lack of equipment you need to carry. Less poles and no guy ropes are huge features of installing a bed end fly conversion kit, plus it gives you more room to use the space under your bed, too. Our Jayco conversion kits are shipped directly to your door and come with a fully-backed warranty so you can shop online with the ultimate confidence at CaravanMods. A bed end conversion kit is one of the greatest accessories you can buy for your van to make your camping experience easier and more convenient for the entire family.